Arbol de Capacidades de Mecanizado CNC

Check thin walls, deep pockets, sharp corners, datum scheme and tolerance stack.

Choose the route by geometry, tolerance, setup count and batch size.

Separate rough and finish cuts, manage stock allowance and thermal distortion.

DFM, operaciones, referencias, fijacion y planificacion de produccion.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

Slots, pockets, contours, surfaces, chamfers and helical interpolation.

Outer diameters, bores, faces, grooves, threads and tapers.

Reduce secondary setups and improve positional consistency.

Cavidades, perfiles, agujeros, superficies, ejes y roscas.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

Vertical, horizontal, CNC lathe and mill-turn platforms.

High-speed machining depends on balance, runout and thermal growth.

Flood coolant, MQL and through-spindle coolant.

Maquinas CNC, husillos, refrigeracion, palpadores y control.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

High rpm, strong chip evacuation, anti-welding and anodized appearance control.

Watch hardness, work hardening, tool wear and cutting heat.

Control distortion, burrs, heat impact and surface scratches.

Aluminio, acero, inoxidable, cobre, plasticos y superaleaciones.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

End mills, drills, taps, reamers, boring tools and form tools.

Select by material, temperature, lubrication and wear pattern.

Control rigidity, runout, balance and tool overhang.

Geometria, recubrimientos, sujecion, descentramiento y vida util.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

Calculated from cutter diameter and recommended cutting speed.

Based on rpm, flute count and feed per tooth.

Match tool rigidity, material, clamping and machine power.

Velocidad, avance, profundidad, ancho de corte y MRR.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

Choose location by part shape and datum scheme, avoiding over-constraint.

Balance rigidity, distortion, changeover time and tool clearance.

Improve cycle time, repeat positioning and inspection consistency.

Posicionamiento, apriete, cambio rapido y repetibilidad.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

Set by functional surfaces, material, volume and cost.

Flatness, perpendicularity, true position, concentricity and profile.

First article, dimensional report and process capability traceability.

Dimensiones, GD&T, rugosidad, primer articulo e inspeccion por lote.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.

Anodizing, plating, passivation, black oxide, blasting, brushing and coating.

Quenching, tempering, aging, nitriding and stress relief.

Rust prevention, damage protection, separated packing and batch tracking.

Desbarbado, tratamiento termico, acabado superficial, limpieza y embalaje.

Check clamping, tool reach, heat, chip flow and inspection before production.

Turn process knowledge into repeatable quality, lead time and documentation.