标签： burr control

CNC Micro-Hole Drilling and Burr Control Tool Selection Guide

2026年10月14日 / CNC Machining Guides, CNC Tool Selection

CNC Micro-Hole Drilling and Burr Control Tool Selection Guide

CNC 微孔钻削与毛刺控制配刀指南

Select carbide micro dri…

17-7PH Spring Clip Strip CNC Tool Selection for Relief Slots and Burr-Free Latch Tabs

2026年9月2日 / CNC Machining, CNC Machining Case Studies

17-7PH Spring Clip Strip CNC Tool Selection for Relief Slots and Burr-Free Latch Tabs

17-7PH弹簧夹片窄槽与无毛刺卡扣边的数控配刀

A CNC tool-selection cas…

Sialon Ceramic Nozzle Seat CNC Tool Selection for Angled Spray Bores and Fragile Exit Lip

2026年9月2日 / CNC Machining, CNC Machining Case Studies

Sialon Ceramic Nozzle Seat CNC Tool Selection for Angled Spray Bores and Fragile Exit Lip

Sialon陶瓷喷嘴座斜孔与薄出口边的数控配刀

A practical drawing-base…

6061 Aluminum Thin-Wall Electronics Housing CNC Case: Pocket Roughing, Rib Support and Burr Control

2026年8月18日 / CNC Cutting Tools, CNC Machining, CNC Tooling Case Studies, Drawing-Based Tool Selection

6061 Aluminum Thin-Wall Electronics Housing CNC Case: Pocket Roughing, Rib Support and Burr Control

6061 铝合金薄壁电子机箱 CNC 案例：型腔粗加工、加强筋支承与毛刺控制

A practical drawing-base…

Vacuum Fixturing for Thin Sheet CNC Milling: Holding Parts Without Distortion

2026年8月8日 / CNC Cutting Tools, CNC Machining

Vacuum Fixturing for Thin Sheet CNC Milling: Holding Parts Without Distortion

薄板 CNC 铣削为什么适合真空夹具

Vacuum fixturing is usef…

Thin-Wall CNC Milling Burr Control: Tool Selection, Support and Finishing Sequence

2026年8月3日 / CNC Cutting Tools, CNC Machining

Thin-Wall CNC Milling Burr Control: Tool Selection, Support and Finishing Sequence

薄壁 CNC 铣削毛刺控制：刀具、支撑与精加工顺序

Select sharp carbide end…